Thread: MM2211 Gateway

Hello,
I have been able to login of MM2211 gateway.
here are details
IP: 192.168.30.10
SUBNEt: 255.255.255.0
gateway: blank

open 192.168.30.1 in browser
use admin/password for logging in...

after that the problem is that the device is readonly.. i cant figure out how to change settings.
i believe we require to change or upgrade the framework or we need to login by telnet.
i can open login propmt of ssh by putty on port 22 but unable to login there.
well please try and test and post results here, i would have tried it, but gotta go malaysia tonight,so not enought time.

But please test and post results here
If you need help post here


And i am thirsty for thanks, so dun forget to thank me.

hi,i am unable to open the settings page in the browser...........no luck.please explain the step by step config.my ip address in lan set to automatic and dns also to automatic.default-gateway-113.193.136.1.a thanks in advance.

also i have taken up 799ul plan and really suffering from bandwidth issues despite of 100% signal......any help?

Originally Posted by luvkushrock

hi,i am unable to open the settings page in the browser...........no luck.please explain the step by step config.my ip address in lan set to automatic and dns also to automatic.default-gateway-113.193.136.1.a thanks in advance.

Open Lan properties (right click on lan icon in task bar or your network adapter in network options)
then click properties

in the TCP/Ip again click properties and select manual
then enter the following details
IP: 192.168.30.10
SUBNEt: 255.255.255.0
gateway: blank

After that you will not be accessed to internet. then try what i have mentioned above.

Further note that you need to be connected by straight Ethernet Cable (provided by tikona) and not by wireless. Also if it didnt work out, try to do that after removing antenna or a area where the signal strangth is not there.
But probably it will work without removing antenna.

post if problem persists.

Originally Posted by luvkushrock

also i have taken up 799ul plan and really suffering from bandwidth issues despite of 100% signal......any help?

Have they provided you 8dbi antenna
also try using ethernet cable rather then wifi...

They told that to reset the device, put a pin or safety pin, in the hole on the side of antenna and press for 10-15 seconds.

i will be trying out next month once i get back.. meanwhile if someone doesit, please post here result.

hi vinz89,i have tried what u have written but none is working out.i am only left with doing the following method by removing antenna(so that signal becomes weak).can u suggest some more methods to open and change settings of the modem or some software so i could try to make some changes in tikona wifi modem.thanks in advance.

Originally Posted by luvkushrock

hi vinz89,i have tried what u have written but none is working out.i am only left with doing the following method by removing antenna(so that signal becomes weak).can u suggest some more methods to open and change settings of the modem or some software so i could try to make some changes in tikona wifi modem.thanks in advance.

have you manually changed your ip...
As far as i have stidied, once connected by cable the router has two ips,one is192.168.30.1 and other is in 192.168.0.X range.(second is random and i have seen 3 different ips)

the antenna and signal are secondary, but you need to have change the ips i have said manually.
do one thing,
change the pip configuration of your sustem, to that as i have said,
then try logging in to 192.168.30.1.

if that work out, i will be posting a article soon at my blog for finding the ip and hacking it out, will update the link here.

hi vinz, yes i have manually change my ip to 192.168.30.10 and then tried to login with 192.168.30.1.but nothing seems to work.

Originally Posted by luvkushrock

hi vinz, yes i have manually change my ip to 192.168.30.10 and then tried to login with 192.168.30.1.but nothing seems to work.

hold on, as soon as i get time, i will write a detail article on my blog with screenshots.......

1.
In TCP/IP Properties change to obtain IP address automatically.
Apply Save.
2.
please post this data ipconfig /all

Thanks for the investigation and R&D done. But it didn't work for me.
Hope you can post with some screenshots.

Regards,
Rahul

Originally Posted by vinz89

Hello,
I have been able to login of MM2211 gateway.
here are details
IP: 192.168.30.10
SUBNEt: 255.255.255.0
gateway: blank

open 192.168.30.1 in browser
use admin/password for logging in...

after that the problem is that the device is readonly.. i cant figure out how to change settings.
i believe we require to change or upgrade the framework or we need to login by telnet.
i can open login propmt of ssh by putty on port 22 but unable to login there.
well please try and test and post results here, i would have tried it, but gotta go malaysia tonight,so not enought time.

But please test and post results here
If you need help post here


And i am thirsty for thanks, so dun forget to thank me.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32> Ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : KP-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) Family PCI-E
Gigabit Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-1F-D0-E9-53-21
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::65e2:ffee:38de:103%11(Preferred)
IPv4 Address. . . . . . . . . . . : 113.193.140.197(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.248.0
Lease Obtained. . . . . . . . . . : 07 February 2010 12:04:31
Lease Expires . . . . . . . . . . : 07 February 2010 13:04:29
Default Gateway . . . . . . . . . : 113.193.136.1
DHCP Server . . . . . . . . . . . : 113.193.1.15
DHCPv6 IAID . . . . . . . . . . . : 234889168
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-DE-80-6D-00-1F-D0-E9-53-21

DNS Servers . . . . . . . . . . . : 113.193.1.14
113.193.0.148
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{B2A565C2-BE17-4404-80FA-ED2AD7CA9885}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter 6TO4 Adapter:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:71c1:8cc5::71c1:8cc5(Preferred)
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : 113.193.1.14
113.193.0.148
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 9:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:3c7a:65c:8e3e:733a(Prefe
rred)
Link-local IPv6 Address . . . . . : fe80::3c7a:65c:8e3e:733a%14(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Please post ipconfig /all
see link for screenshots manual.
http://www.indiabroadband.net/tikona...tml#post263815 (Tikona WiBro issues + Ruckus router IP, login details and configuration)

Originally Posted by luvkushrock

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32> Ipconfig /all

Windows IP Configuration


IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:3c7a:65c:8e3e:733a(Prefe
rred)
Link-local IPv6 Address . . . . . : fe80::3c7a:65c:8e3e:733a%14(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Dont post your ip config here, or change last segment of your ip, as tikona people are also surfingthe web.

sorry but my tour is extended here in malaysia.
As i will be getting home, and having access to my router,
will be posting info here.

Thnx

@luvkushrock

hi,i am unable to open the settings page in the browser...........no luck......

Enter
Current IP Check
Type the address in the browser address bar.
What message you get ? or any window opens ?
feedback.

Originally Posted by essbebe

Enter
Current IP Check
Type the address in the browser address bar.
What message you get ? or any window opens ?
feedback.

That will not work since it is in bridge mode and not route mode.

@vinz89

that will not work since it is in bridge mode and not route mode.

you won't get an IP address ?
when you enter
[quote]http://checkip.dyndns.com/
1
You try, and then say it did not work.
Say
error 404/
or
error message "................."
No window opened.
nothing happened etc.
No problem.
2.
Don't say it will not work and give the same "hackneyed' reason for past one week
or
3
.say, no way the settings can be accessed
( you have accessed them ?)
4
.and even if you access the modem settings pages you cannot do any changes !
5.
or
this reply we can give to others,
when they ask the same question.

hold on, as soon as i get time, i will write a detail article on my blog with screenshots.......

Originally Posted by essbebe

@vinz89
You try, and then say it did not work.
Say
Got error message "................."
No window opened.
nothing happened etc.
No problem.
Don't say it will not work and give the same "hackneyed' reason for past one week
or
say no way the settings can be accessed
( you have accessed them )
and even if you access the modem settings pages you cannot do any changes !

Same reply we can give to others when they ask the same question.

hi there,
i have tested it and said that. i have done ccsp (cisco security professional) and working as an network security analyst. i had tried it, while i was analyzing the device.

i tried theip from external.
only 3 local ports are accessible 22,453,80. i have stated settings that workedfor me. how i got that, i said i will be posting screenshots once i return.
for me the ruckus device permanent address was 192.168.31.1 and temprary address was 192.168.229.1 (also 192.168.229.54)

also settings are not read only. they can be changed but we need to get super user rights. the admin/password is only view mode.
for super user username: super, password i am not able to figure out yet.

hope it could satisfy for the time being.
Thanks

also settings are not read only. they can be changed but we need to get super user rights. the admin/password is only view mode.
for super user username: super, password i amnot able to figure out yet.

I had posted the USER MANUAL link
When you get time, you can read it.

Anyway first time I have learnt that a modem is "READ ONLY " with a particular ID and Password.

Originally Posted by essbebe

I had posted the USER MANUAL link
When you get time you can read it.

i have a friend in ruckus sales dept.
he said, the company does customized programming of devices for ISP. Those settings are with only ISP and Ruckus Tech Dept and cannot be fetched. on his advice i also posted a query in official ruckus forum, they also said the same.

the user manual is for those who purchase it form company, as they have access to super user. and will be useful only once we get super user access. I read that 10-15 days back from original ruckus site.
i have read manual, as thats the basic step for reading.


THNX

keep the thread alive.also vinz have u found a way to sneak into ruckus 2211 please suggest some more tips or tricks, so that we can try.

Originally Posted by luvkushrock

keep the thread alive.also vinz have u found a way to sneak into ruckus 2211 please suggest some more tips or tricks, so that we can try.

hi there, i am in malaysia... as soon as i be getting back, i will surely be giving here completein depth tutorial.. but till then you have to wwait, as for getting sreenshots and screencasts, i need to have access to my 2211, which is unfortunately at my home...
Please wait till 1st week of march

one more link for MM2211
with screen shots.
How do I configure the Ruckus MetroFlex WiFi modem? - Google Wifi Help

Is there a way to bring this device to factory defaults?

Will this be on any use?

Tikona has set the router for their WIFI services
and probably do not want you to share the connection
with other computers /laptops etc,
and may expect payment for a new connection.
When you disconnect TIKONA service
you have to returnthe unit in working condition
.Else you have to pay Rs 1000/= or Rs 1500 extra.
( check in their website ).
IT is not sold to you.
Para two:
The RUCKUS modem /router can be set to factory defaults but
If you cannot see the details of default IP ACCESS USERid AND pw
You wiull loose the connection and onlyTIKONA can restore
connection.
You seem to have done RESET earlier.
No other ISP available in your area ?

This MM2211 appears to have dual wifi mode.





REF:

http://www.indiabroadband.net/tikona...-settings.html (Access 192.168.1.1 modem settings.)

Originally Posted by essbebe

Tikona has set the router for their WIFI services
and probably do not want you to share the connection
with other computers /laptops etc,
.....................

http://www.indiabroadband.net/tikona...-settings.html (Access 192.168.1.1 modem settings.)

I agree with @essbebe, its right that they have not sold the instrument.

if you sstill want to reset, there is a small pin size hole at the back side at right most, you need to press a paperclipthere for 8-10 seconds to reset it..

then it will reset. but you loose al settings, and you need to call tikona peop;e then to continue....

Originally Posted by vinz89

I agree with @essbebe, its right that they have not sold the instrument.

if you still want to reset, there is a small pin size hole at the back side at right most, you need to press a paperclipthere for 8-10 seconds to reset it..

then it will reset. but you loose al settings, and you need to call tikona peop;e then to continue....

i have tried pinning method way number of times but still its not restoring it to the factory default settings.do not know what's the problem.one day(last month) when i was having no signal, tikona guys suggested me to pin it for 10-15 seconds and then after doing it for number of times only once it showed 192.168.1.1 .well for the past few days i am trying it hard with this pinned method but now its not showing the following default gateway address again.any more suggestions.when it showed the following 192.168.1.1
address both lights except power and ethernet was not red they were off(it was showing them off.)