Problem of LAN with Tikona

I have tikona 599 plan connection with their modem and my Netgear wifi router.

The problem is if I disable DHCP in netgear and assign manually ip address to my PC's on LAN then the login page of tikona does not open on any of the pc's. And if dhcp is enabled then I am able to open the tikona login page on any pc and surf.

But I need to assign fixed ip addresses to all pc's.

Also my iphone is not working in either DHCP mode (on/off). It does not work even in dhcp enabled mode and login done on a pc.

Previously all of above was working but later when I had done some changes in my office the setup was disturbed and now I couldn't setup a lan with tikona connection.

As u all r aware that expecting any help from tikona is useless.

Help would be greatly appreciated.

And if dhcp is enabled then I am able to open the tikona login page on any pc and surf.

1.
Presume you can access BB with ONLY one system.
and you have to log in. in each system.
2.
All cannot work at the same time.
Confirm please.
3.
Mention modem supplied by Tikona.
Also confirm you COULD NOT make any changes
in settings in above modem.
4.

iphone is not working in either DHCP mode (on/off)

Does the wifi SSID name appear in the phone ?

@ashishpimpri

Well. Change the mac address of your ethernet adapter to a common one.

In this case you will be assigned same ip address by dhcp server to all your systems.

So when you login in one pc you will have internet access in all the other pcs and u dont need to login in every pc

Iam not sure about this coz ip conflicts might take place

Do try and post ur results
------------------------
WELL YOU NEED A STATIC IP OR COMMON IP IN ALL PCS

Originally Posted by essbebe

1.
Presume you can access BB with ONLY one system.
and you have to log in. in each system.
2.
All cannot work at the same time.
Confirm please.
3.
Mention modem supplied by Tikona.
Also confirm you COULD NOT make any changes
in settings in above modem.
4.

Does the wifi SSID name appear in the phone ?

1 - I can access BB on all systems when dhcp enabled. Login can be done on any of the system.
2 - All can work at once.
3 - I will give the make of modem tomorrow.
4 - Iphone connects to netgear router but there is 0 speed to surf. Though it was working previously.

To be precise the problem i am facing is that if dhcp is disabled then i am not able to access the tikone login page and therefore cannot access net also.

Originally Posted by dudebuster

@ashishpimpri

Well. Change the mac address of your ethernet adapter to a common one.

In this case you will be assigned same ip address by dhcp server to all your systems.

So when you login in one pc you will have internet access in all the other pcs and u dont need to login in every pc

Iam not sure about this coz ip conflicts might take place

Do try and post ur results
------------------------
WELL YOU NEED A STATIC IP OR COMMON IP IN ALL PCS

The main problem is that I need separate IP addresses for all systems on LAN and also have tikona BB working with login possible on all PC's.

If I disable DHCP and assign manually IP to all PC's the LAN works but tikona login page does not open.

If I enable DHCP, all pc's r able to access tikona login page and therefore can have access to internet also. But then systems are assigned IP automatically and therefore some of my LAN work is not possible due to changing IP addresses on every restart of systems.

Now i get it

Tikona provides dynamic ip address. But you can get a static ip for extra charges

Note that ip doesnt change on every restart. it depends on the time the lease is obtained and time of expiration.

The reason why you are not assigned the same ip address is that the 'ip' you were assigned earlier might be assigned to another host.