Thread: regarding connecting with iball baton 150m router

hi ,,,i am having tikona internet connection,
i want to take i ball baton router to connect more laptops and other devices to my connection.
my doubt is that if i take the router and insert the ethernet cable in the i ball router will the router login itself or it will send the signal of login page to the receivers of wifi signal
so i want the router to login to tikona for my ease.
any solutions.
thanks

ASk customer Care of Tikona for advice first.
If you are getting a RJ45 cable which goes directly to your computer
and you login with ID/PW in browser,

a Standalone wifi router may be needed. ( borrow from friend )
Then change the rj45 from computer end to WAN port.
Another rj45 to computer.
Confirm you get connected to Tikona.

Then try WIFI.

Not sure this will work. So far No feedback.
Tikona can give you DIRECT wifi access.
BAD reports about Tikona and rarely check this forum.

hi ,,,,
i dont have any router
but i have the ruckus m 2211 C shape device provided by tikona,
i have wifi from that modem but it is limited to two laptops,
i need to share for more thanks,,,
wat abt other linksys or d-link router.

thanks man...
i am having the tikona wifi router of rukus m 2211,,,,from which i connect through the ethernet cable to my laptop and then login from the browser.
if i take the wifi router,,,i will have to insert the ethernet cable from the rukus m 2211 to the router then the router will connect to my laptop,,,,then i will log in .....so will the router now send internet to all the other devices connected to it...
is there any method to no need to login but directly when i ON my router the router will start internet automatically,.
thanks man.

If you get one RJ45 cable from Tikona, you can connect ONLY to the LAN port of a Desktop or Laptop.

Ruckus m2211C:
No changes can be made by you.
It picks up wifi mode signals of Tikona and gives an output to connect via RJ45 cable.

No wifi mode possible.Talk to Tikona and say you want the Laptop to work in WIFI mode.
2.
You can use a STANDalone WIFIrouter example NEtgear wgr614V9, and connect the rj45 to WAN port. ( select Dynamic IP)
3.
Connecting the Iball wifi router : try connecting to LAN1 and another RJ45 from LAN 2 to desktop.
Setting up Interface/Internet connection page:
Little tricky, and no guarnatee can be given.
You have to select Static IP: ( others 1483 bridged/PPPoE will not work )
Give the IP of Tikona
subnet mask also same:
Gateway will be again Tikona's.
Obtain from ipconfig /all.

I have tried both methods and working ! here in my flat with WI5 Broadband Wifi connection.

thanks man wiilll try! if i get a router!