D-link wireless N 300 ADSL router as wireless client bridge

I have a Beetel 450TC1(internet) modem+router which came with Airtel connection.
And a DSL 2750u (d-link) modem+router. I want to extend the range of the wifi/internet using d-link router.I have searched many forums they only provide details about how to connect them with CAT cable. But I want connect them wirelessly(may called as wireless bridge)

Please help me on how to do it.
regards,
Sushil

Check and confirm both have an option called WDM or WDS
I think both DSL2750U/450TCI have the option.
DSl2750 similar to Beetel 450BXI wa3002_g4 etc .
Should have the option.

Originally Posted by essbebe

Check and confirm both have an option called WDM or WDS
I think both DSL2750U/450TCI have the option.
DSl2750 similar to Beetel 450BXI wa3002_g4 etc .
Should have the option.

DSL2750u Confirmed don't know about 450tc1. But if they do can you tell how to use wdm or wds to connect them. Please

Both wifi routers should have the facility.
Mention Firmware version of Beetel450TCI
or check in the wifi page. WDS menu.
wait.....

Originally Posted by essbebe

Both wifi routers should have the facility.
Mention Firmware version of Beetel450TCI
or check in the wifi page. WDS menu.
wait.....

Firmware Version:TM4-0Q-008

Thanks for the snapshot essbebe
I think my firmware doesn't have that feature... I have tried to find new one over net but can't find it... can you give me link...

check and confirm. from wifi page. Also menu item radius server will appear.
Confirm WDS available in DSL2750U.
SEARCH BOX above beetel220BX essbebe
AT your own risk FW upgrade!
One advantage of this router . if you load the wrong file you will get an error message.
file extension *.ras

Attachment 10280

Please have a look....

122.166.105.80 - /Firmwares/IPTV-FIRMWARE/FIRMWARE/BEETEL-450TC1/

I have to RESET my 450TCI to confirm. ( Not possible to access menu pages)

try this first.
http://www.megaupload.com/?d=BH706E9B

TM4-0Q-020_20100628(With-Without CAS).rar
or
TM4-0Q-021(With CAS ONLY).rar
Which one to use ??

try the megaupload site firmware first.
Feedback.

How to backup ISP settings... after updating modem will get reset n i will lose all settings...

It worked!!

Now i have WDS in both Modem but i m really confused how to configure them.
As both have different interface. Please bro help me....

It worked Now i have WDS in both Modem routers.
It is too late to ask about settings restoration once the Firmware has been flashed !
Confirm the present Firmware version for Beetel450TCI.

Presumed you would have saved previous settings
Check link 450TCI given below.

Para two:
(a) Confirm Beetel450BXi can work in normal LAN mode
(b) in Wifi mode. SSID name and security key mode ?
(c) confirm you have set Beetel 450TCI as above and connect in LAN mode.
(d) 450TCi in wifi mode. SSID name ? security key mode ?
(e) Whether the SSID's Both appear in the laptop
Use only wep security key. now.

Feedback.

Originally Posted by essbebe

It worked Now i have WDS in both Modem routers.
It is too late to ask about settings restoration once the Firmware has been flashed !
Confirm the present Firmware version for Beetel450TCI.

Presumed you would have saved previous settings
Check link 450TCI given below.

Para two:
(a) Confirm Beetel450BXi can work in normal LAN mode
(b) in Wifi mode. SSID name and security key mode ?
(c) confirm you have set Beetel 450TCI as above and connect in LAN mode.
(d) 450TCi in wifi mode. SSID name ? security key mode ?
(e) Whether the SSID's Both appear in the laptop
Use only wep security key. now.

Feedback.

I took screenshot of the setting of the modem before flashing the firmware.

Beetel 450TC1
WDS option is there now
(a) Its working in lan mode
(b) In wifi mode SSID - Airtel keymode wep-64bit

D-Link 2750U
(c & d)Same as above working in lan mode & wifi mode. SSID - Dlink Keymode - Wep

(e) Both ssid are appearing in Laptop.

But the question is how to use there WDS mode to extend range. Please help Essbebe..

9. Go to Wireless -> Basic
Tick on : Enable Wireless
SSID: Your choice, i.e. AIRTEL_2 etc
10. Go to Wireless -> Security
Network Authentication: Shared
WEP Encryption: Enabled
Encryption Strength: 128-Bit
Network Key 1: enter any 13 digit key, easiest is +91-<MOBILENUMBER> i.e. +919999888777
11. Go to Wireless -> Wireless Bridge
AP Mode: Access Point
Bridge Restrict: Enabled
Remote Bridges MAC Address: Mac Address of your Master Router i.e. the string in this format 00:1A:40:83:R0:13
(if you don’t know just select Enabled (Scan) and it will display list of Access Points Broadcasting,
Tick on your master router if it’s displayed in the list else press refresh. and note down its Mac Address)
12. Go to Wireless -> MAC Filter
Add: MAC Address of Master Router
Add: MAC Address of all the PC’s which will connect wirelessly to this router

And then finally

MAC Restrict Mode: Allow

Okay Let me try Thanks a lot

Not working See Screenshots

Attachment 10303

Attachment 10304

Attachment 10305

Attachment 10306

Attachment 10307

Attachment 10308

Your first screen shot shows you are not connected to Internet !!
if you have edited the details , let me know.
Try Beetel450TCI as the first wifi WDS and connect to adsl line.
First step :
Check each unit in PPPoE "alwaysOn' mode
( userid and PW entered in wan page )
Second steP;
Both wifi routers should work in wifi mode .
Connect to Bsnl Phone junction separately.

Feedback.

Hi,

I also need the same solution for my 2640-T and 2750u Routers. 2640-T is the primary router with internet and the other one i bought recently to do SSID Bridging. I did a lot of troubleshooting and didnt come up to anything.

I did the steps you mentioned here but didnt work for me. Any help?