Results 1 to 9 of 9

Multiple Machines/ Users connecting to same BB connection using Teracom Model

  1. #1
    Junior Member
    Join Date
    Oct 2010
    Posts
    4

    Default Multiple Machines/ Users connecting to same BB connection using Teracom Model

    Dear All,

    I am using the BSNL Teracom Type II Modem at home. I can connect 1 laptop to the modem by adding the MAC ID. I have also added the MAC ID of the other laptops through the modem settings. But only 1 laptop can be connected at 1 time. Concurrent/ Simultaneous usage is not possible.

    I followed the directions for enabling multiple users (shared on Calcutta Telephones) but then the wireless stopped working.

    I have gone through the following links to have answers but unfortunately they are not for the new Teracom Modem:
    indiabroadband.net/broadband-how/8348-solution-multiple-machines-connecting-same-bb-connection.html
    indiabroadband.net/bsnl-broadband/5295-solution-multiple-machines-connecting-same-bb-connection.html#post12663

    My question is:
    1. How do different users in the same house share the BB Connection on wireless through the Teracom Type II Modem?
    2. Is there any other link that suggest the steps to configure multiple & simultaneous connections?

    Thanking in anticipation
    regards

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    1. How do different users in the same house share the BB Connection on wireless through the Teracom Type II Modem?

    1
    Connect in "Always On" mode
    ( Userid and pW entered in wan page ofmodem.
    Uncheck "Bridged" and enable PPP/PPPoE)
    2.
    Enable DHCP in modem/router give range 192.168.1.3 to say 192.168.15
    3. In all systems(laptops) in wifi mode
    Network/WLAN/Properties/tcp/IP/propeties.
    Select Obtain. ip address automatically.
    4.
    Try: disable the white list
    5.
    confirm
    SSID name appears in all laptop/s wifi connection.
    6.
    2. Is there any other link that suggest the steps to configure multiple & simultaneous connections?
    Check Teracom link below.
    7.
    Feedback item wise .

  3. #3
    The Wizard meetdilip's Avatar
    Join Date
    Aug 2009
    Posts
    8,776

    Default

    1. Configure your modem according to this guide

    Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION

    2. Enable DHCP in your modem.

    3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".

  4. #4
    Junior Member
    Join Date
    Oct 2010
    Posts
    4

    Default

    Quote Originally Posted by essbebe View Post
    1. How do different users in the same house share the BB Connection on wireless through the Teracom Type II Modem?

    1
    Connect in "Always On" mode
    ( Userid and pW entered in wan page ofmodem.
    Uncheck "Bridged" and enable PPP/PPPoE)
    2.
    Enable DHCP in modem/router give range 192.168.1.3 to say 192.168.15
    3. In all systems(laptops) in wifi mode
    Network/WLAN/Properties/tcp/IP/propeties.
    Select Obtain. ip address automatically.
    4.
    Try: disable the white list
    5.
    confirm
    SSID name appears in all laptop/s wifi connection.
    6.
    2. Is there any other link that suggest the steps to configure multiple & simultaneous connections?
    Check Teracom link below.
    7.
    Feedback item wise .
    Dear Essbee,

    1. Do you want me to change these settings through the "Configuration" tab?
    2. In the "DHCP Server Configuration" > "Advanced Settings" > PoolRanges (192.168.1.2-192.168.1.17) is already there. Do I need to change it?
    3. You are suggesting disable "Whitelist". Do I delete all the MAC IDs that I had added in Wireless Network>>MAC Address Filter?

  5. #5
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    wifi setup discussion.
    similar unit.
    http://www.indiabroadband.net/bsnl-b...t-working.html
    wait.....
    1. Not clear.
    Laptop changes done in computer Network settings.
    2. No need to change the DHCP range.
    3.white list.
    When disabled entered mac address/es ( existing )will not affect.wifi connection.
    4. copy/paste ipconfig /all
    only for two laptops ( one connected to Internet & working ) ONLY WLAN details.

  6. #6
    Junior Member
    Join Date
    Oct 2010
    Posts
    4

    Default

    Quote Originally Posted by essbebe View Post
    wifi setup discussion.
    similar unit.
    indiabroadband.net/bsnl-broadband/29845-ar-800-v-v-3-0-wifi-not-working.html
    wait.....
    1. Not clear.
    Laptop changes done in computer Network settings.
    2. No need to change the DHCP range.
    3.white list.
    When disabled entered mac address/es ( existing )will not affect.wifi connection.
    4. copy/paste ipconfig /all
    only for two laptops ( one connected to Internet & working ) ONLY WLAN details.
    1. Configuration Settings of Teracom Modem through the Admin login.
    2. Understood
    3. Understood
    4. Not clear. Why is ipconfig/ all required and do I need to do it through the cmd prompt of both the laptops?

    Quote Originally Posted by meetdilip View Post
    1. Configure your modem according to this guide

    calcuttatelephones.com/dataoneinstall/mu12.html]Teracom Type-II ADSL MODEM MULTIUSER CONFIGURATION

    2. Enable DHCP in your modem.

    3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".
    1. Website not opening since evening.
    2. Is it to be done on the modem through the configuration > DHCP Server Configuration? If yes, then it is already enabled over there.
    3. Automatic detect settings Already present on the laptops.

    Multiple Laptops are getting connected to the modem. But they are getting connected to the Internet.
    Last edited by anstri; 31st October 2010 at 11:00 PM. Reason: Automerged Doublepost

  7. #7
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    4. Not clear. Why is ipconfig/ all required and do I need to do it through the cmd prompt of both the laptops?

    You cannot change TCP/IP configuration via cmd mode.
    Start/Network/WLAN
    Properties
    Network settings page
    Select TCP/IP box ( can disable IPV6 if it appears )
    Properties.
    Next page.
    Select Obtain Ip address automatically.
    in all laptops which you intend to work in wifi mode.
    5.
    Multiple Laptops are getting connected to the modem. But they are getting connected to the Internet.
    No need to post ipconfig /all dtata if problem solved.

  8. #8
    Junior Member
    Join Date
    Oct 2010
    Posts
    4

    Default

    Quote Originally Posted by essbebe View Post
    4. Not clear. Why is ipconfig/ all required and do I need to do it through the cmd prompt of both the laptops?

    You cannot change TCP/IP configuration via cmd mode.
    Start/Network/WLAN
    Properties
    Network settings page
    Select TCP/IP box ( can disable IPV6 if it appears )
    Properties.
    Next page.
    Select Obtain Ip address automatically.
    in all laptops which you intend to work in wifi mode.
    5.


    No need to post ipconfig /all dtata if problem solved.
    Thanks for this suggestion. The problem is not solved yet. I have done the "Obtain Ip address automatically" on all the machines.

    The problem is the configuration on the Teracom Modem.

  9. #9
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    1. How do different users in the same house share the BB Connection on wireless through the Teracom Type II Modem?
    The problem is the configuration on the Teracom Modem.
    1.Not clear whether you lost wifi connection for a single laptop also.

    2.
    presume your LAN mode is working .
    3
    .Kindly check the wifi settings pages
    (a)
    http://img594.imageshack.us/img594/3673/44150498.png
    ( wifi page select auto/manual channel 6 or 11)
    (b)
    http://a.imageshack.us/img690/2667/81518116.png white listMAC address) deselect white list.
    Last edited by essbebe; 1st November 2010 at 04:08 AM.

Similar Threads

  1. Replies: 113
    Last Post: 27th January 2016, 10:27 PM
  2. Replies: 38
    Last Post: 2nd April 2013, 05:52 PM
  3. help for connecting multiple users to single internet connection
    By Sai Ragh in forum Cable Internet Services
    Replies: 2
    Last Post: 5th August 2012, 10:35 AM
  4. Connecting to Multiple Wireless Connection
    By mojojo in forum Windows
    Replies: 8
    Last Post: 12th February 2009, 08:58 AM
  5. Plz suggest: connecting multiple machines
    By RoCkSoLiD in forum Tata Indicom broadband
    Replies: 2
    Last Post: 9th July 2008, 02:21 PM