Results 1 to 36 of 36

Problem setting up WGR614v10 modem with BSNL Data one ADSL modem

  1. #1
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default Problem setting up WGR614v10 modem with BSNL Data one ADSL modem

    The Router doesn't setup with netgear genie or manually, it shows the error No Router, but i am using fresh cables and have tried changing cables but still the same error.
    Manually, i can't open routerlogin.net, please help me fix it :S

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    RESET the modem with power on for about 6 to 20 seconds.
    See in th model label IP address Example 192.168.0.1

    Check this guide by @just4kix
    http://www.indiabroadband.net/attach...r-wgr614v7.zip

    Still problem:
    Post Router status page.:

    REF:
    Recent discussion on similar model screenshots, more confusion !
    http://www.indiabroadband.net/broadb...em-router.html

  3. #3
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Tried resetting twice, no changes.
    The guide doesn't help me because there is no wizard mode in my 192.168.1.1 The LAN mode doesn't work so i can't see the status page

    Please help guys I am in urgent need of this, i have my exams coming up and i need the Wifi for that :S
    Last edited by pujitjuneja; 8th December 2011 at 09:20 PM. Reason: Automerged Doublepost

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Did you check the other link given. ?@vivo88 problem for WGN1000?
    Menu pages were posted and tweaks made to get the router working.
    REF:http://help.orange.co.uk/orangeuk/su...ersonal/462189

    Your reply is vague. First job is to access Menu pages.
    Manually, i can't open routerlogin.net, please help me fix it :
    See in the model label IP address Example 192.168.0.1
    Tried resetting twice, no changes.
    means you could do some settings in the wifi router ?or could not access menu pages /

    2.
    no wizard mode in my 192.168.1.1 ......
    Router doesn't setup with netgear genie
    what info 'Genie' asked ?


    Para two:
    (3)Confirm you access the menu pages, with whatever IP you have selected.
    ( If ADSL modem IP is 192.168.1.1 you have to change NEtGEAR's IPaddress in its LAN page to say 192.168.2.1 )
    (4)
    If accessed :Post connection status screen shot.
    (Only settings in five or six menu pages settings involved.)
    Start with answer NO. Obtain dynamic IP etc.
    (5)
    Mention details of the ADSL modem/Number in use.
    (6)
    How do you connect ?
    Dialer mode Or PPPoE mode ( id/PW stored in WAN page of adsl modem )
    Feedback. Answer each question by number.

    Check when I am ONLINE in this forum and alert by sending a PM
    ( private message). Don't move away from the forum.
    I spent about 1 hour with Vivo88 and because of his feedback to me
    He got his modem+wifi router up working in WIFI mode.
    Last edited by essbebe; 8th December 2011 at 11:03 PM.

  5. #5
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Thanks for your reply to my topic.
    Sorry if you thought the reply was vague, i was simply stating that i can't access menu pages because the LAN mode doesn't work.

    2-Netgear genie just asked me to make the connections, nothing else, and then gave me the error that No Router detected.

    3-Access to menu page is through 192.168.0.1, but it doesn't open.

    4-Do i post screenshot of connection status in Win7?

    5- I use UT300R2U

    6-Connect using PPPoE mode

  6. #6
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    YOUR PM. Replied how to access the wifi router menu pages ?
    Connect ONLY the wifi router and try.

  7. #7
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Replied too, couldn't reply here since i am not allowed to post links

  8. #8
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    2-Netgear genie just asked me to make the connections, nothing else, and then gave me the error that No Router detected.
    Explain how you made the connections

    This report only with wifi router connected to computer.



    Click LAN and see status. details. what ip address you got ?
    How can you connect to Internet only with standalone WIFI router ?

    Presume you get connected with UT300r2u with old settings.

  9. #9
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    First i switched off the modem and took the plug out.
    then i took the LAN cable from the box and connected one end to modem and other to router.
    Next i took a new cable and with it connected the router to the computer. (The ports are colour coded so i'm sure i did the connections right)
    Next, i turned on the modem, and after 2 mins the router.
    Then i tried to set it up on genie, but genie said No Router Present.

  10. #10
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Modem RJ45 goes to WAN port. LAN1 to computer OK.
    What is the default IP printed in wgr 614v10 ?
    are you using the correct ID and PW ?
    Usually admin PW password
    Try Netgear PW blank. or 1234

    Netgear Genie is an external application. not needed now.
    ( not part of WGR614.v10 )

  11. #11
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    I'm not able to get to the ID and PW dialog box, i just put the address in the address bar, press enter and it displays that the page is not available.
    The default IP is not printed on the router, just the domain routerlogin.net is given for setup.

  12. #12
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Change rj45 from modem to to LAN1 and from LAN2 to computer.
    confirm ut300r2U can be accessed.192.168.1.1
    Try Netgear's with default address given.routerlogin.net

    downloaded Netgear genie . wait.

  13. #13
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Already tried that, still the same problem
    EDIT: and yes, i can access UT300R2U through 192.168.1.1
    Netgear genie downloaded

  14. #14
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default Netgear Genie

    http://kbserver.netgear.com/kb_web_f...TGEARGenie.asp
    13.4 MB application.
    do you get this page ?

  15. #15
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    yes, i get this page

  16. #16
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Select router settings.
    Then use defaultId pw for wireless router ). Mention it here.
    post error message which appears ( as in my screen shot )
    I cannot proceed further.

    2. Create a WLAN in your laptop.
    ( MY wifi network is selected . ) Check any other ssid's appear.

  17. #17
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    ID: admin
    PW: password
    Can't post screenshot due to post limit, but my error is same as yours

    2- Do you mean set the router up using windows 7 or a virtual one? If you're talking about virtual i already have it and it pops up. Even the NETGEAR SSID appears, and when i click connect it shows this :
    Do you want to set up your Router? (again, can't post image)

  18. #18
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    UPDATE:
    Change UT300r2U IP address to 192.168.1.2 in its LAN page.

    WGR614v10:
    Try 192.168.1.1 ID admin PW password. confirmed.

    Your Point 2 :
    Even the NETGEAR SSID appears, and when i click connect it shows this :
    Do you want to set up your Router?
    Some hope ! TRY.
    Presume default SSID given in label of router.security key also may be available. confirm.

    2.
    You can post images as attachments.
    Here Select Go advanced
    Scroll down
    attachments
    Manage attachments
    upload from Hard disk.
    ( ensure picture size readable and JPG and fills the page (same way i have posted )
    or upload from the external URL.

    If you cannot access menu pages WGR614V10 either directly or via Genie appln , , you have to contact Netgear customer care.on Phone.
    Return the model to the shop and get a replacement.

    Para two:
    If you can connect any laptop in LAN mode, download application "Connectify" application for your OS XP Windows 7 or Vista.
    The Wlan adapter in laptop will work as AP for other wifi devices within range.
    Last edited by essbebe; 9th December 2011 at 12:30 AM.

  19. #19
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Actually, i just found a solution- It is problem with BSNL, i remembered that i also had this problem with my modem a while back, and turned out there was some problem from their side, so i will try if they can configure it and then contact netgear, but thanks for your help anyway..

  20. #20
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    BTW

    did you enable DHCP in modem and given a range
    192.168.1.2 to 192 168.1.10 ? Then try 192.168.1.2 for Netgear

    It is problem with BSNL,
    How will they access the wifi menu pages of your wifi router>
    setting your WIFI router with adsl modem is your own job.
    Somehow you have to access the menu pages. of wifi router.


    Anyway update the thread.
    feedback waiting for last post now from you. .

  21. #21
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Quote Originally Posted by essbebe View Post
    BTW

    did you enable DHCP in modem and given a range
    192.168.1.2 to 192 168.1.10 ? Then try 192.168.1.2 for Netgear


    How will they access the wifi menu pages of your wifi router>
    setting your WIFI router with adsl modem is your own job.
    Somehow you have to access the menu pages. of wifi router.


    Anyway update the thread.
    feedback waiting for last post now from you. .
    I have forwarded a replacement request for the router to Flipkart, and they will replace it soon.

  22. #22
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Fine.
    Please update thread when replacement unit is set up correctly.

    For UT300r2U settings see this link.
    http://mp.bsnl.co.in/bb/modems.htm

  23. #23
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Recieved new unit and it works but i have one problem, i still can't get to the router configuration page :S

  24. #24
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    still can't get to the router configuration page
    Back to square One !

    Thanks for the feedback. Did you use Netgenie ? ( Post No 14 )
    How the settings were made by you ?

    24/1
    if you are able to access in wifi mode with
    default ssid and security key( which I feel you want to change ), let it remain.
    24/2
    When connected check ipconfig /all
    and find the Gateway for WLAN
    Default may be 192.168.0 1 or http://routerlogin.net
    Feedback.
    Last edited by essbebe; 14th December 2011 at 06:33 PM.

  25. #25
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    A- Yes, used netgenie, and still the same error.
    B- Yes i can access it and want to change that.
    C-Gateway is 10.0.0.1 and it redirects to www.routerlogin.com/start and then it says oops google chrome could not find the page (Also tried with IE and Firefox and same thing)
    I really wanna add the security, since i can't risk it being accessed by someone else, my BB is not UL any more

  26. #26
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Gateway is 10.0.0.1 ( for Netgear wgr614v10)

    How you got this IP address ? from ipconfig /all?

    http://www.routeripaddress.com/route..._settings.html

  27. #27
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Yes. i got it from ipconfig /all

  28. #28
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    PROBLEM
    BRAND NEW WGR614v10 10.0.0.1 ID ? PW ? Cannot access menu working Ok
    1.
    Copy/paste ipconfig /all data here or attach as *.doc
    2.
    Check LAN / wireless settings /change password
    http://www.voiproblem.com/emulators/...rface=WGR614v6

    feedback.
    Last edited by essbebe; 15th December 2011 at 07:24 AM.

  29. #29
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : PUJIT-PC
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Wireless LAN adapter Wireless Network Connection 2:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
    Physical Address. . . . . . . . . : 70-F1-A1-C2-F4-DE
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes

    Ethernet adapter Bluetooth Network Connection:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
    Physical Address. . . . . . . . . : C4-46-19-F5-F1-EE
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes

    Ethernet adapter Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Atheros AR8152 PCI-E Fast Ethernet Contro
    ller
    Physical Address. . . . . . . . . : B8-AC-6F-5F-CD-89
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::9cf7:7946:ebd3:ebf4%11(Preferred)
    IPv4 Address. . . . . . . . . . . : 10.0.0.2(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : 15 December 2011 14:57:14
    Lease Expires . . . . . . . . . . : 16 December 2011 14:58:50
    Default Gateway . . . . . . . . . : 10.0.0.1
    DHCP Server . . . . . . . . . . . : 10.0.0.1
    DHCPv6 IAID . . . . . . . . . . . : 297315439
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CD-DC-EA-B8-AC-6F-5F-CD-89

    DNS Servers . . . . . . . . . . . : 10.0.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Wireless LAN adapter Wireless Network Connection:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : DW1501 Wireless-N WLAN Half-Mini Card
    Physical Address. . . . . . . . . : 70-F1-A1-C2-F4-DE
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes


    And now i can't even access the one with default SSID and password
    Last edited by pujitjuneja; 15th December 2011 at 04:44 PM.

  30. #30
    Platinum Member whitestar_999's Avatar
    Join Date
    Jan 2008
    Posts
    2,276

    Default

    turn off wireless & try to access 10.0.0.1 using lan & run cmd & type ping 10.0.0.1 & post result here.
    Is God willing to prevent evil, but not able? Then he is not omnipotent.
    Is he able, but not willing? Then he is malevolent.
    Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?

  31. #31
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Post No 24.
    Recieved new unit and it works but i have one problem, i still can't get to the router configuration page :S
    24/1
    if you are able to access in wifi mode with
    default ssid and security key( which I feel you want to change ), let it remain.
    REPLY:
    B- Yes i can access it and want to change that.

    Now !
    And now i can't even access the one with default SSID and password.
    Not understood. You could access the Wifi router's menu items and changed
    some settings ? using Netgenie or the emulator ?

    Please edit ipconfig /all and delete all tunnel data ( not needed )

  32. #32
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Quote Originally Posted by whitestar_999 View Post
    turn off wireless & try to access 10.0.0.1 using lan & run cmd & type ping 10.0.0.1 & post result here.
    Thanks for the advice, but i got 10.0.0.1 working now, just had to disable DHCP
    Quote Originally Posted by essbebe View Post
    Post No 24.
    Recieved new unit and it works but i have one problem, i still can't get to the router configuration page :S
    24/1
    if you are able to access in wifi mode with
    default ssid and security key( which I feel you want to change ), let it remain.
    REPLY:
    B- Yes i can access it and want to change that.

    Now !


    Not understood. You could access the Wifi router's menu items and changed
    some settings ? using Netgenie or the emulator ?

    Please edit ipconfig /all and delete all tunnel data ( not needed )
    I meant that last night i could use Wifi mode with default SSID, this morning when i came back from college i couldn't but now i have been successful in getting to the Router's settings page (www.routerlogin.net), i just can't find the appropriate settings, i'll try a few combinations, and then get back to you
    Thanks a lot for your help and patience BTW.

  33. #33
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    for records: (tomorrow inserts will be deleted )

    connection status
    http://i40.tinypic.com/331g4ld.jpg

    India Broadband Forum

    Basic settings. NO . if external modem used in PPPoE mode.
    http://www.indiabroadband.net/attach...1&d=1323955158

    http://www.indiabroadband.net/attach...1&d=1323955883
    Last edited by essbebe; 15th December 2011 at 10:58 PM. Reason: insert pics deleted . User wifi mode working now.1100PM

  34. #34
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Sorry for late reply, i was a little busy
    Here is screenshot of router status

  35. #35
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    the screen shot I posted . did you select YES ?

  36. #36
    Junior Member
    Join Date
    Jun 2011
    Posts
    22

    Default

    Oh, crap, yes i did, i will reconfigure and see
    EDIT: my problem was solved.
    Thanks a lot essbebe
    The thing was that I had to go to basic settings page and set IP to Static, and enter the same configuration i use to connect on my laptop (in IPv4 settings).
    Now i am enjoying Wifi on my phone and laptop, thanks a lot
    Last edited by pujitjuneja; 15th December 2011 at 11:06 PM.

Similar Threads

  1. Reliance Connection issue with NETGEAR modem (wgr614v10)
    By ja.aslam in forum Reliance Broadband
    Replies: 4
    Last Post: 30th March 2013, 12:25 AM
  2. Replies: 1
    Last Post: 29th December 2011, 06:56 PM
  3. D link ADSL modem GLB 802-C problem
    By id_866 in forum BSNL broadband
    Replies: 12
    Last Post: 23rd August 2011, 09:51 AM
  4. WIFI repeater, Modem 2WIRE 2710HG-B, router NETGEAR WGR614v10
    By Joel Calley in forum Broadband How to
    Replies: 2
    Last Post: 11th July 2011, 04:55 AM
  5. link & data lamp of adsl modem didn't glow
    By ramanujmaith in forum BSNL broadband
    Replies: 3
    Last Post: 14th October 2007, 08:19 AM